The IAG Timing Belt Kit is designed as a replacement for the OEM EJ20 and EJ25 engines. Included in the kit are IAG Adjustable Idler Pulleys, IAG's black racing timing belt, IAG timing belt guide, OEM idler, and timing belt tensioner. The IAG Adjustable Timing Idler kit is intended to properly align the camshafts on Subaru EJ20/EJ25 cylinder heads and/or blocks that were resurfaced (“Reducing” long block length), or utilize thicker head gaskets (“Increasing” long block length). The product is precision CNC machined and hand-assembled in-house. Each idler features a machined 10mm hex enabling your socket to hold it in place while you adjust the timing to perfection. The IAG Black Racing Timing Belt works with all Subaru EJ series engines. The belts are lightweight and utilize EPDM Rubber for increased durability and performance in all climates. The Kevlar construction is 300% stronger than the OEM belt and is also three times more heat resistant. The teeth are made of H-NBR grade rubber for additional strength. Extensive testing of this belt on our Spintron testing machine, as well as our fleet of racing vehicles, found that these belts ensure accurate timing and unmatched performance. The timing belt tensioner is one of the most important components in the Subaru timing system. Aftermarket, units are known to fail prematurely, which can cause catastrophic failure. The IAG Timing Belt Kit includes an OEM original equipment tensioner assembly direct from Fuji Heavy Industries. In Subarus, it is more common to experience a timing idler-bearing failure than it is to experience a failure of the timing belt itself. The IAG timing belt guide is the best method to prevent your EJ engine from skipping a beat. Each guide is machined from a single piece of 6061 billet aluminum and then anodized black for a protective finish. The guide is a strong, rigid replacement and adjustable to set the proper clearance for the timing belt.
Features & Benefits:
- High-strength Kevlar construction
- Accurate Timing
- Black Color
- OEM+ Quality
- Properly Align Cams
Associated Comments:
- Includes: (x1) Racing Timing Belt, (x1) IAG Timing Belt Guide, (x2) IAG Adjustable Idler Pulleys, (x1) OEM FHI Belt Tensioner Assembly, (x1) Timing Belt Roller, (x1) Timing Belt Cog
- Disclaimer: We have performed extensive testing on this product and have not noticed any fading or transfer of color to the timing components. However, we can not guarantee that the belt will not transfer color material. In our testing of other timing belts, we have not found color transfer to be detrimental to the operation of the belt.
- Limited Warranty: The IAG Black Racing Timing Belt is warranted to be free from defects in material or workmanship for the specified replacement interval determined by the belt manufacturer and original equipment car manufacturer. IAG will, at its option, replace or repair any merchandise proved defective in material or workmanship, or both, during the warranty period. This shall be the sole remedy for breach of warranty.
- THE BELT MUST BE REPLACED AT THE SPECIFIED INTERVAL DETERMINED BY THE BELT MANUFACTURER AND ORIGINAL EQUIPMENT CAR MANUFACTURER. FAILURE TO DO SO MAY RESULT IN CATASTROPHIC ENGINE DAMAGE, FOR WHICH SELLER HEREBY DISCLAIMS ALL RESPONSIBILITY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, HEREBY ARE EXPRESSLY DISCLAIMED. LIABILITY FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL, EXEMPLARY AND INDIRECT DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOST PROFITS, HEREBY IS EXPRESSLY EXCLUDED, REGARDLESS OF WHETHER THEY WERE REASONABLY FORESEEABLE, OR WHETHER SELLER HAD KNOWLEDGE THAT THEY COULD OCCUR.
- Exclusion of Warranty: The warranty shall be void to the extent that any of the following, in the sole determination of Seller, occurs: (a) improper installation of the Products into vehicles, including, but not limited to, failure to install, tension and maintain the belt according to the vehicle and belt manufacturers' recommended procedures, using OE recommended tools or their equivalent
- or (b) improper usage by Purchaser, including, but not limited to, failure to use the belt on the application as defined in the belt manufacturers' printed or online applications catalog or (c) induction of defect by other products or (d) mishandling of the Products or other abuse or (e) improper matching with other applications or (f) collision, engine overheating or oil starvation, belt misapplication, product contamination, including, but not limited to, with oil, solvents, or antifreeze or (g) any use not recommended in writing by IAG Performance
- 02-03 Subaru WRX requires small idler pulley bolt PN# 800708460, that is NOT INCLUDED.
Additional Attributes:
Extended Information:
- Emissions : CARB Eligible
- Life Cycle Status: Available To Order
Packaging:
- Quantity of Each: 1
- Package UOM: EA
- Dimension: 16 x 11.25 x 2.75 inches
AUTHORIZED
